3ware Escalade Storage Switch User Guide
Installing the storage switch while installing
SuSE Linux with YaST1
Materials required
• 3ware 3DM CD-ROM, 3ware driver installation disk for SuSE
Linux (1)
• 3ware driver installation disk.
• SuSE Linux Installation CD-ROM/DVD and boot disk
Note:
nected to the motherboard interfered with using the
Escalade Storage Switch as a boot device. Disconnecting
the IDE drive while installing Linux will eliminate this
problem. After Linux is installed, the drive can be recon-
nected.
Create disk arrays
Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters.
Boot with the SuSE CD/DVD or diskette
1 Insert SuSE Boot diskette into the floppy drive of the computer.
If your BIOS supports it you may boot directly from the SuSE
installation CD-ROM/DVD disk instead.
2 Select the manual or YaST1 installation method. YaST2 is not
supported. If the system boots in YaST2 mode, select Abort and
continue the install from the main installation menu.
108
We have tested systems where an IDE drive con-
www.3ware.com