ID Override Transmission
A A A A Select [ID Override Transmission].
B B B B Specify a 4 digit ID Code with the number
keys and the [A], [B], [C], [D], [E] and [F].
Note
If you make a mistake, press [Clear] or
the { { { { Clear/Stop} } } } key and try again.
E E E E
Press [Only Once] or [Save] to delete or save
the file after transmission.
Note
To delete the original immediately after
transmission, select [Only Once].
To repeatedly send the original, select
[Save].
To cancel the Polling Transmission, press
[Cancel]. The display will return to the
Transmission Mode menu.
Operating
InstructionsFacsimile Reference (option) <Advanced Features>
F F F F
Press [OK].
The Transmission Mode menu is shown.
The [Polling TX] key is highlighted, and the
specified mode is shown above.
G G G G
Press [OK].
The initial display is shown.
H H H H
Press the { { { { Start} } } } key.
Polling Transmission Clear Report
This report allows you to verify whether Polling
Transmission has taken place.
Limitation
This report is not printed if the User Parame-
ters are set to allow the stored originals to be
repeatedly sent (Save).
the User Parameters"
Note
You can turn this function on or off with the
User Parameters.
User Parameters"
(Switch03, Bit6)
You can set whether a portion of the sent im-
age is printed on the report with the User Pa-
⇒ p.216 "Changing the User
rameters.
Parameters"
(Switch04, Bit7)
⇒ p.216 "Changing
(Switch11, Bit7)
⇒ p.216 "Changing the
25