Sending An Auto Document - Ricoh 3800C Operating Instructions Manual

D D D D
Select the standard message to be stamped.
Note
Programmed standard messages are
shown in the keys. If there are none pro-
grammed, the message "*Not Programed"
is shown.
The machine cannot stamp multiple stand-
ard messages.
E E E E
Press [OK].
The [Std. Message] is highlighted, and the se-
lected standard message is shown.
F F F F
Press [OK].
G G G G
Dial, and then press the { { { { Start} } } } key.
Operating InstructionsFacsimile Reference (option) <Advanced Features>

Sending an Auto Document

If you often have to send a particular page to peo-
ple (for example a map, a standard attachment or
a set of instructions), store that page in the mem-
ory as an Auto Document. This saves rescanning
the document every time you want to send it.
You can fax an Auto Document by itself, or at-
tach it to a normal fax message.
Preparation
You need to program an Auto Document.
p.179 "Storing and Changing an Auto Docu-
ment"
Important
Whenever you store or change an Auto Doc-
ument, we recommend that you print the Auto
Document list for reference.
ports/Lists"
Limitation
You can attach one Auto Document to each
transmission.
101
⇒
⇒ p.187 "Re-