Programming And Changing A Scan Size - Ricoh 3800C Operating Instructions Manual

H H H H
Press [Exit].
The initial display is shown.
Programming and Changing a
Scan Size
When you select a Scan Size to scan a non-stand-
ard size original, two custom sizes of original are
available (Program Size 1 and Program Size 2).
Use these functions to program a custom size in
advance.
To change an existing Scan Size, just use the
same procedure.
Important
When programming or changing a Scan Size,
we recommend that you make a memo of the
new size.
Note
You can specify a horizontal length from 128
to 1,200mm or from 5.5 to 47 inches.
A A A A
Press the { { { { User Tools/Counter} } } } key.
Operating InstructionsFacsimile Reference (option) <Advanced Features>
B B B B
Select [Facsimile Features].
The Facsimile Features menu is shown.
C C C C
Check that the "Prog./Change/Delete" tab
is shown.
D D D D
Select [Program/Change/Delete Scan Size].
E E E E
After confirming [Register/Change] is se-
lected, press [Program Size 1] or [Program
Size 2].
183