Mercury 1996 Sable Manual page 206

Using the "SCAN" function with your
cassette tape player
Press the "SCAN" button to begin the
forward scan mode on the tape currently
playing, stopping on each tape selection for
approximately an eight-second sampling
(display flashes "SCAN").
To stop the scan mode on the presently
sampled tape selection press "SCAN" a
second time.
How to change the side of the tape being
played
The alternate side of the tape can be selected at
any time by pressing the "SIDE 1-2" button.
How to eject the tape
To stop the tape and eject the cassette, press the
"EJ" button. The radio will resume playing if the
power is on. The tape cartridge can be ejected
with radio power (and/or ignition) on or off.
How to store the tape
Press the "AM" or "FM" button (or "CD", if
equipped) to stop the tape player and resume
radio play (or CD-DJ).
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. "Dolby" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the k button to activate Dolby B Noise
Reduction. Push again to deactivate.
179