Mercury 1996 Sable Manual page 199

Stereo and Stereo Cassette Radios
Using the Controls on Your New Radio
How to turn the radio on and off
Press the "VOL PUSH ON" button to turn the
radio on. Press again to turn off.
How to adjust the volume
Turn the "VOL PUSH ON" knob to the right to
increase the volume and to the left to decrease
the volume. Dots illuminate in the display to
show relative volume level.
NOTE: If the volume is set above a certain
level when the ignition is turned off,
the volume will come back to a
"nominal" listening level when the
ignition is turned back on. However, if
the radio power is turned off with the
"VOL PUSH ON" button, the volume
will not change and will remain at the
level set when the radio is turned back
on.
Selecting the AM or FM frequency band
Press the "AM" or "FM" button to select the
desired frequency band or to stop/store cassette
tape (when a cassette is playing). Pressing the
"FM" button more than once will alternate
between FM1 and FM2. These functions are used
with the station memory buttons described
under How to tune radio stations.
How to tune radio stations
There are four ways for you to tune in a
particular station. You can manually locate the
station using the "TUNE" button, "SEEK" to the
station, "SCAN" to the station or select the
station by using the memory buttons. These four
methods are described below.
172