Mercury 1996 Sable Manual page 15

After you get into your vehicle, close the door
and lock it. Then adjust the seat to the position
that suits you best.
Pull the combination lap/shoulder belt from the
retractor so that the shoulder portion of the belt
crosses your shoulder and chest. Be sure the belt
is not twisted. If it is, remove the twist. Insert
the belt tongue into the proper buckle until you
hear a snap and feel it latch. Make sure the
tongue is securely fastened to the buckle by
pulling on tongue.
Fastening the front seat combination lap and shoulder belt
NOTE: Be sure to read and understand
Important Safety Belt Information at
the beginning of this chapter.
Unfastening the combination lap and shoulder belts —
front and rear outboard seating positions
12