Steering Column Controls - Mercury 1996 Sable Manual

Steering Column Controls

The controls on the steering column and wheel
are designed to give you easy access to the
controls while you are driving.
The Turn Signal Lever
You can use the turn signal lever on the left side
of the steering column to:
operate the turn signals
turn the high beams on/off
flash the lights
turn the windshield wipers and washer
on/off
Turn Signals
Move the lever up to signal a right turn. Move
it down to signal a left turn. The corresponding
indicator light in the instrument cluster will
flash.
If the turn signal stays on after you turn, move
the lever back to the center (off) position.
For lane changes, move the lever far enough to
signal but not to latch. The lever will return to
the off position when you release it.
High Beams
To turn on the high beams, turn the headlamp
control knob to the headlamp ON position and
push the turn signal lever away from you until
it latches. When the high beams are ON, the
high beam indicator light on the instrument
panel comes on.
115