Table of Contents
Advertisement
S (Panel and floor) button
Push this button to get air from the floor and
instrument panel registers at the same time. The
display will show the set temperature and S.
Depending on the selected temperature, the air
will be automatically heated or cooled.
R (Floor)
Airflow will be to the floor when the R (floor)
button is pressed. The display window will
show the set temperature and R (floor) to the
right of the temperature. Fan speed will be
automatic unless manually controlled. If you
override the fan speed and wish to return to
automatic fan control, press AUTO. Then, again
select R (floor) for airflow to the floor.
P (Floor and defrost)
Press this button to get air to the floor and
windshield defrosters at the same time. The
display will show the set temperature and P. If
the outside temperature is about 50˚F (10˚C) and
above, the air will be dehumidified to remove
moisture. This will help to prevent fogging in
humid weather.
V F-DEF (Front defrost)
Press the V F-DEF (front defrost) button to
obtain maximum airflow to the windshield.
Adjust the temperature setting as required for
defrosting. The Display window will show the
temperature setting with V to the right of the
temperature. When the outside temperature is
about 50˚F (10˚C) and above, the air will be
dehumidified to remove moisture. This will help
prevent fogging in humid weather.
102
Hide quick links:
Advertisement
Table of Contents
