Subaru Legacy Outback 2006 Owner's Manual page 237

5-70
Audio
Fader and balance control
Mode Range of levels
(displayed)
FADER R9 to F9
BALANCE L9 to R9
The volume control dial normally controls the volume. It controls the fader or balance
when the relevant control mode is selected.
Choose the desired setting in each mode by turning the volume control dial. The radio
will return to the volume control mode after approximately five seconds.
Dial turned counterclock-
wise
Front attenuated Rear attenuated
Right channel attenuated Left channel attenuated
Dial turned clockwise
TONE BAL
To change the control mode: Each brief
press of the "BAL" button changes the
control mode to the next one in the follow-
ing sequence. (The sequence starts with
the fader control mode.) When the radio is
first turned on, it is in the volume control
mode.
FADER BALANCE
LOAD
500079
VOLUME