Subaru Legacy Outback 2006 Owner's Manual page 214

If you press either of the other mode
buttons ("BAND" or "TAPE") while the
player is in the loading mode, the player
will enter the standby mode. Press the
"CD" button to start playback.
NOTE
If you do not insert a disc in the 15-
second period after the appearance of
the "LOAD" or "ALL LOAD" indication,
the player will return to the mode in
which it was operating just before the
"LOAD" button was pressed.
When inserting a CD, hold it by
touching the center hole and outside
edge and insert it into the slot with the
label side on top.
How to play a CD
To listen to a CD
When CDs have been inserted, pressing
the "CD" button causes the playback to
begin with the CD that was last played.
During CD playback, the display will show
the disc number, the track number, and
the playback time.
NOTE
Discs are played in order of disc num-
bers (beginning with #1). When play-
back of disc #6 finishes, the player re-
turns to the beginning of disc #1 and
begins the sequence again. The player
skips any disc number for which a disc
has not been inserted.
To select a CD for playback
1 2 3
During CD playback, press the disc select
500061
button for the CD to which you wish to lis-
ten. Playback of the selected CD will be-
gin.
5-47
Audio
5 6
4
500050
– CONTINUED –