Ford 1997 Aerostar Manual page 53

Using the "AMS" function to manually tune
your radio (Stereo Cassette Radio)
You can change the frequency up or down
one increment at a time by first pressing the
"AMS" button (display shows "TUNE") then
within approximately five seconds pressing
and releasing either the right ( a ) or left ( b )
side of the "SEEK" button. To change
frequencies quickly, press and hold down
either the right or left side of the "SEEK"
button.
Using the "SEEK" function
Press the right ( a ) side of the "SEEK"
button to select the next listenable station up
the frequency band. Press the left ( b ) side of
the button to select the next listenable station
down the frequency band. By holding the
button down, listenable stations can be
passed over to reach the desired station.
Using the "SCAN" function (Stereo Cassette
Radio)
Press the "SCAN" button to enter the scan
mode. The radio will begin scanning up the
frequency band, stopping on each listenable
station for approximately a five-second
sampling. This continues until you press the
"SCAN" button a second time.
Setting the Station Memory Preset buttons
Your radio is equipped with 5 station
memory buttons. These buttons can be used
to select up to 5 preset AM stations and 10
FM stations (5 in FM1 and 5 in FM2). Follow
the easy steps below to set these buttons to
the desired frequencies.
50