Ford 1997 Aerostar Manual page 275

6. Apply brakes to confirm the brakelamp is
functional after installing.
Replacing the high-mount brakelamp bulb — liftgate
models only
Dual Rear Door Models
To remove the brakelamp:
1. Remove the two screws from the surface of
the lens.
2. Pull the lens assembly out of the lamp
housing.
3. Pull the bulb socket out of the lens assembly.
It is not necessary to twist the socket.
4. Pull the bulb out of the socket.
To replace/install the brakelamp:
1. Push the bulb into the socket.
2. Push the socket into the lens assembly.
276