Ford 1997 Aerostar Manual page 31

NOTE: Illuminated bars in the display show
relative levels of bass and treble and
positions of speaker balance and fader
functions after adjustments are made,
then revert to volume level set.
Clock operation
When in the radio mode, push the "CLOCK"
button to switch from radio frequency to clock.
Only the clock numerals will be displayed in the
clock mode — there is no AM/PM indication.
When in the clock mode, the time will be
displayed until the button is pushed again.
However, if you retune the radio while it is in
the clock mode, the new radio frequency will be
displayed for approximately ten seconds and
then change back to clock display.
When in the CD mode, push the "CLOCK"
button to change the display from elapsed time
mode to track number mode to clock mode. If
the CD track selection is changed when you are
in the clock or elapsed time mode, the new track
number will be displayed for approximately ten
seconds and then revert back to the previous
mode.
The clock can also be viewed with the ignition
off. Push the "CLOCK" button and the time will
be displayed momentarily.
To set the clock, simultaneously press the
"CLOCK" button and either the bottom ( b ) half
of the "SEEK" button to set hours, or the top
( a ) half of the "SEEK" button to set minutes.
28