Ford 1997 Aerostar Manual page 34

Pressing and holding the bottom ( b ) or top ( a )
half of the "SEEK" button will scroll backward
and forward respectively through the tracks.
How to fast forward or reverse your CD
player
To quickly search for a particular point in a
selection, press the "FF" button (to fast forward)
or the "REV" button (to reverse). While either
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing
either button for more than three seconds will
speed up the process.) Release the button at the
desired point (found by watching the elapsed
playing time in the display or by listening to the
sound during fast forward or reverse). When
you have reached the beginning of track 1, the
CD player will begin playing.
When you have reached the end of the disc by
keeping the fast forward button pressed, the
display will show "END" and the player will go
into pause mode. Push the "PLAY/STOP"
button to begin playing the first track of the
disc, press the "REV" button to back up from
the end of the disc, or use the "SEEK" function
to locate a desired track.
Using the "SCAN" function
Press the "SCAN/TUNE" button to enter the
scan mode. Once in the scan mode, press the top
( a ) or bottom ( b ) half of the "SEEK" button to
scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on
each listenable track for approximately eight
seconds. This continues until you press the
"SCAN/TUNE" button a second time. While in
the scan mode, the display shows the current
sampled track number.
31