Ford 1996 Taurus Manual page 229

The center attachment wheel cover
To replace the wheel cover:
1. Reinstall the pedestal on the wheel before
reinstalling the wheelcover.
2. One of the windows on the wheelcover is
identified with a valve stem logo on the
inside of the cover. Align this valve hole on
the wheelcover with the valve stem on the
wheel. Reinstall the cover by pressing with
the palm of your hand. Do not use excessive
force. Do not use a hammer.
3. Attach the bolt to the pedestal through the
center hole in the cover with the lug wrench.
4. Align the legs of the center ornament with
the slots on the wheel cover. Reinstall the
ornament by pressing with the palm of your
hand. Do not use excessive force. Do not use
a hammer.
231