Ford 1996 Taurus Manual page 97

To turn your EATC on, press the AUTO button
or any of the six manual override buttons along
the bottom of the control.
To turn your EATC off, press the OFF button.
When the system is off, the Display window will
be blank (dark).
If you select AUTO, the system will
automatically determine fan speed and airflow
location. If a manual override button is selected,
your selection determines airflow location only.
Fan speed remains automatic unless you
override it by pressing either side of the FAN
speed button located at the extreme left of the
control panel.
Temperature selection
The TEMP button at the upper left of the
Control is for temperature selection. The a side
of the TEMP button will increase the set
temperature and the b side of the TEMP button
will lower the set temperature. Pressing the
button and releasing it will change the set
temperature one degree. Holding either side of
the button in will rapidly change the
temperature setting in one degree increments to
either 65˚F (18˚C) or 85˚F (29˚C). Then, the set
temperature will jump 5˚F(3˚C) and stop at
either 60˚F (16˚C) which is maximum cooling or
90˚F (32˚C) which is maximum heating.
To change the temperature, select any
temperature between 6O˚F (16˚C) and 90˚F
(32˚C) by pressing the a or b side of the
TEMP button. The EATC will display the
selected temperature.
97