Ford 1996 Taurus Manual page 62

ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON position once
the engine is started and remains in this position
while the engine runs.
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake warning light.
Removing the Key From the Ignition
Procedures for removing the key from the
ignition will be the same for both the column-
and console-mounted gearshifts.
1. Put the gearshift in P (Park).
2. Set the parking brake fully.
3. Turn the ignition to the LOCK position.
4. Remove the key.
If you have difficulty in turning the key, rotate
the steering wheel slightly because it may be
binding.
If the driver's door is open while the key is still
in the ignition, a warning chime sounds.
Always set the parking brake fully and
make sure the gearshift is securely latched
in P (Park).
60
RWARNING