Ford 1996 Taurus Manual page 172

Setting the Station Memory Preset buttons
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
Follow the steps below to set these buttons to
the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
Using the Radio Set feature
With Radio set, you can automatically set
strong stations into your memory buttons.
AM, FM1 and FM2 will be set sequentially.
Turn the radio off with the "VOL PUSH ON"
knob. Press and hold the "SCAN" button and
turn the radio on by pressing the "VOL
PUSH ON" knob. Continue holding the
"SCAN" button until "RAD" is shown in the
display.
NOTE: If there are less than six strong stations
in the frequency band, the remaining
unfilled buttons will store the last
strong station detected on the band.
After all stations have been filled, the radio
will begin playing the station stored on
memory button 1.
174