Table of Contents
Advertisement
How to eject the tape
To stop the tape and eject the cassette, press the
"EJ" button. The radio will resume playing if the
power is on. The tape cartridge can be ejected
with radio power (and/or ignition) on or off.
How to store the tape
Press the "AM" or "FM" button (or "CD", if
equipped) to stop the tape player and resume
radio play (or CD-DJ).
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. "Dolby" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the k button to activate Dolby B Noise
Reduction. Push again to deactivate.
Tape error messages
Your cassette tape player is equipped to
diagnose certain problems you may experience.
Error codes are as follows:
TD E1 — Possible problem tape cartridge. The
cassette player will automatically eject the tape.
Insert the tape again. If the same error code
appears in the display, try a different tape. If the
problem persists, refer the problem to qualified
personnel for service.
TD E2 — Radio cannot eject tape. If tape is not
ejected when the "EJ" button is pressed, refer
the problem to qualified personnel for service.
180
Hide quick links:
Advertisement
Table of Contents
