3. Load discs into the disc magazine slots
(numbered 1 through 6 on the window) one
at a time with labeled surfaces upward,
starting with bottom slot number 1
(Figure 3).
Figure 3
To remove a compact disc from the disc
magazine, slide the corresponding lever on
the opposite side of the magazine window.
The disc will partially eject.
4. Insert loaded disc magazine into changer
unit with the arrow on top of the disc
magazine pointing toward the changer
(Figure 4). Make sure magazine is fully
inserted into changer.
Figure 4
5. Close unit by sliding changer panel door to
the rear (sedan) or front (wagon).
183