Storing Name Tags - Chevrolet 2009 TrailBlazer Owner's Manual

Linking to a Different Phone
g
1. Press and hold for two seconds. The system
responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "Change phone". The system responds with
"Please wait while I search for other phones".
•
If another phone is found, the response will be
"<Phone name> is now connected".
•
If another phone is not found, the original phone
remains connected.

Storing Name Tags

The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
•
Store
•
Digit Store
•
Directory
3-88
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
g
1. Press and hold for two seconds. The system
responds with "Ready" followed by a tone.
2. Say "Store". The system responds with
"Store, number please" followed by a tone.
3. Say the complete phone number to be stored at
once with no pauses.
•
If the system recognizes the number it responds
with "OK, Storing" and repeats the phone number.
•
If the system is unsure it recognizes the phone
number, it responds with "Store" and repeats the
number followed by "Please say yes or no". If the
number is correct, say "Yes". If the number is not
correct, say "No". The system will ask for the
number to be re-entered.
4. After the system stores the phone number, it
responds with "Please say the name tag" followed
by a tone.