Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet Avalanche Owner's Manual

To tilt the wheel, hold the steering wheel and pull the
lever. Move the steering wheel to a comfortable
level, then release the lever to lock the wheel in place.

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•
G Turn and Lane Change Signals. Turn and
Lane-Change Signals on page 3-7.
•
53 Headlamp High/Low-Beam Changer.
Headlamp High/Low-Beam Changer on page 3-8.
•
Flash-to-Pass Feature. See Flash-to-Pass on
page 3-9.
•
N Windshield Wipers. See Windshield Wipers on
page 3-9.
•
L Windshield Washer. See Windshield Washer
on page 3-10.
I
•
Cruise Control. Cruise Control on page 3-10.
For information on the exterior lamps, see Exterior
Lamps on page 3-14 later in this section.

Turn and Lane-Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
3-7