New Holland 667TA/EEG Repair Manual page 99

STEP 40
1
BS06K259
Remove crankshaft (2) from crankcase by means of
a suitable tool (1) and a hoist.
STEP 41
1
BS06K260
Take off main half bearings (1).
Remove bolts (2) and take off oil nozzles (3).
IMPORTANT: Take note of the mounting position of
the main bearings and thrush bearings: If they have
to be reused again, they must be installed in the
same position they had prior to being removed.
87519804 NA
ENGINE REPAIR MANUAL
CHAPTER 2 - 667TA ENGINE OVERHAUL
2
Figure 2-132
2
3
Figure 2-133
Issued 11-06 Bur
STEP 42
BS06K261
Remove bolts and take off camshaft (2), retaining
plate (1).
IMPORTANT: Note plate (1) mounting position.
STEP 43
BS06K262
C a r e f u l l y r e m ove c a m s h a f t ( 1 ) f r o m e n g i n e
crankcase.
STEP 44
1
BS06K263
Remove tappets (1) from the engine crankcase.
1
2
Figure 2-134
1
Figure 2-135
Figure 2-136
2-81