New Holland 667TA/EEG Repair Manual page 98

STEP 36
BS06K255
Remove bolts and take off timing gear case (1).
IMPORTANT: Note the installation position of the
bolts because they are different lengths.
STEP 37
1
2
BS06K256
Remove bolts (1), then take off connecting rod caps
(2).
Remove the pistons (complete with connecting rods)
from the crankcase.
IMPORTANT: Half bearings must be kept in their
respective housings: If they have to be reused, they
must be installed in the same position they had prior
to being removed.
2-80
ENGINE REPAIR MANUAL
CHAPTER 2 - 667TA ENGINE OVERHAUL
1
Figure 2-128
Figure 2-129
STEP 38
1
2
BS06K257
Remove bolts (1) and take off the main bearing
journals(2).
STEP 39
1
2
BS06K258
The main bearing journal cap (1) and its respective
thrush bearing (2) have a shoulder to control
crankshaft endplay.
IMPORTANT: Take note of the mounting position of
the main bearings and thrush bearings: If they have
to be reused again, they must be installed in the
same position they had prior to being removed.
Issued 11-06 Bur
Figure 2-130
Figure 2-131
87519804 NA