New Holland 667TA/EEG Repair Manual page 121

STEP 105
1
2
BS06K333
Install oil pump (1).
Screw fastening bolts (2) and tighten them to the
specified torque 20 to 30 Nm (14.8 to 22.1 lb.-ft.).
STEP 106
1
BS06K334
Apply a new seal ring (2) to the water pump (1).
STEP 107
1
2
BS06K335
Install water pump (1).
Fasten bolts (2) and tighten them to 20 to 30 Nm
(14.8 to 22.1 lb.-ft.) specified torque.
87519804 NA
ENGINE REPAIR MANUAL
CHAPTER 2 - 667TA ENGINE OVERHAUL
Figure 2-206
2
Figure 2-207
Figure 2-208
Issued 11-06 Bur
STEP 108
1
2
BS06K336
Take seal ring (2) off front cover (1), clean surfaces
thoroughly and apply Loctite 5205 sealant to the
surfaces.
STEP 109
1
2
BS06K337
Thoroughly clean the surface of the front cover (2)
and attach it, with fastening bolts (1) and tighten
them to 20 to 30 Nm (14.8 to 22.1 lb.-ft.) specified
torque.
Figure 2-209
Figure 2-210
2-103