New Holland 667TA/EEG Repair Manual page 94

STEP 17
1
BS06K236
Release the drive belt tensioner (2) and remove the
belt (3) from the pulleys. Then remove the belt
tensioner (2).
Loosen bolts holding the alternator to bracket and
remove the alternator (1).
STEP 18
1
2
3
BS06K237
Take out bolts and remove the oil temperature-
pressure sensor (2).
Take out bolts and then remove heat exchanger/ oil
filter bracket (1) and intermediate plate (4) and
relevant gaskets.
Remove the oil level sensor (3).
2-76
ENGINE REPAIR MANUAL
CHAPTER 2 - 667TA ENGINE OVERHAUL
2
3
Figure 2-109
4
Figure 2-110
STEP 19
1
BS06K238
Remove the bolts and disconnect the EDC7UC31
control unit (1), including the heat exchanger.
STEP 20
1
BS06K239
Remove the nut and disconnect the timing sensor
(1). Remove the nuts and disconnect the high
pressure pump (3) including the feed pump (2).
STEP 21
BS06K240
Loosen bolts on flywheel (1) but do not remove the
flywheel.
Issued 11-06 Bur
Figure 2-111
3
2
Figure 2-112
1
Figure 2-113
87519804 NA