Toshiba RAV-GM1601AT8P-E Service Manual page 95

No. Part name
PMV coil 1. Detachment
9
1) Carry out works of 1 of 1 and 3.
2) While pulling the coil upward and
2. Attachment
1) Match the spring to the copper pipe
1. Detachment
Fan guard
!
1) Carry out works of 1 of 1 and 2.
To prevent scratching on the product,
handle the product on a cardboard or
cloth.
2) Take off the discharge port cabinet and
3) Take off the hooking claws (8 positions)
2. Attachment
1) Push the hooking claws (8 positions)
Check that all the hooking claws are fixed
at the specified positions.
Procedure
removing the spring which pinches the
copper pipe, take off the coil from PMV
main body.
and fix it.
CAUTION
then put on it so that the fan guard side
directs downward.
of the fan guard.
with hands from the front side to fix the
claws.
CAUTION
PMV coil
PMV main body
Fan guard
- 95 -
Remarks
Spring
Dicharge port cabinet
Bell mouth
Hooking craw