Toshiba RAV-GM1601AT8P-E Service Manual page 94

No. Part name
2. Mounting of compressor
Compressor
8
(Continued)
1) Mount the compressor in the reverse
NOTES:
∗ After exchange of the compressor, be sure
to exchange the compressor lead.
In this time, the compressor lead does not
contact with the discharge pipe.
∗ As shown in the right figure, mount the
soundproof plate by inserting between the
compressor and the piping, and between
piping and the partition plate.
∗ Put the compressor lead wire and the
compressor case thermo between partition
plate and the soundproof as if dropping
them in.
Procedure
procedure of removal.
(SOUND-INSU inside)
(SOUND-INSU out side)
- 94 -
Remarks
(TD-Sensor)
(SOUND-INSU upper)