Table of Contents
Advertisement
418
6-3. Do-it-yourself maintenance
If dust and clogs cannot
be completely removed
If dust and clogs cannot be com-
pletely removed with the air
intake vent cover installed,
remove the cover and clean the
filter.
1
Turn the power switch off.
2
Using a Phillips screwdriver,
remove the clip.
3
Remove the air intake vent
cover.
Pull the cover as shown in the illus-
tration to disengage the 8 claws,
starting from the claw in the upper
right corner and pull the cover
toward the front of the vehicle to
remove it.
4
Remove the air intake vent
filter.
Disengage the 4 center claws from
the filter.
Disengage the claws in the order of
and
to remove the filter from
A
B
the cover.
5
Remove the dust and clogs
from the filter using a vacuum
cleaner, etc.
Make sure to also remove the dust
and clogs from the inside of the air
intake vent cover.
6
Reinstall the filter to the
cover.
Engage the claws in the order of
Advertisement
Table of Contents
