Toyota Venza 2021 Manual page 407

Hide thumbs Also See for Venza 2021:
Table of Contents

Advertisement

unique ID code. When replacing
a tire pressure warning valve
and transmitter, it is necessary
to register the ID code.
When registering the ID codes,
perform the following procedure.
Vehicles with 4.2-inch display
1
Park the vehicle in a safe
place, wait for approximately
20 minutes, and then start
the hybrid system.
2
Press
or
control switches on the steer-
ing wheel and select
3
Press
or
control switches and select
"Vehicle Settings", and then
press
.
4
Press
or
control switches and select
"TPWS setting", and then
press
.
5
Press
or
control switches and select
"Identify Wheel". Then press
and hold
pressure warning light starts
slowly blinking 3 times.
The change wheel set mode is acti-
vated and registration is started.
Then a message will be displayed
on the multi-information display.
When registration is being per-
formed, the tire pressure warning
light will blink for approximately 1
minute then illuminate and "--" will
be displayed for the inflation pres-
sure of each tire on the multi-infor-
6-3. Do-it-yourself maintenance
of the meter
.
of the meter
of the meter
of the meter
until the tire
mation display.
6
Drive straight (with occa-
sional left and right turns) at
approximately 25mph (40
km/h) or more for approxi-
mately 10 to 30 minutes.
When registration is completed, the
tire pressure warning light will go off
and the inflation pressure of each
tire will be displayed on the multi-
information display.
Even if the vehicle is not driven at
approximately 25 mph (40 km/h) or
more, registration can be com-
pleted by driving for a long time.
However, if registration does not
complete after driving for 1 hour or
more, perform the procedure again
from the beginning.
7
Initialize the tire pressure
warning system. (P.404)
Vehicles with 7-inch display
1
Park the vehicle in a safe
place, wait for approximately
20 minutes, and then start
the hybrid system.
2
Press
or
control switches on the steer-
ing wheel and select
3
Press
or
control switches and select
407
of the meter
.
of the meter
6

Advertisement

Table of Contents
loading

Table of Contents