Toyota Venza 2021 Manual page 114

RCTA (Rear Cross Traffic
■
Alert) (P.267)
 RCTA (Rear Cross Traffic
Alert) on/off
Select to enable/disable the RCTA
system.
 "Volume"
Select to change the RCTA buzzer
volume.
PKSB (Parking Sup-
■
port Brake System) (if
equipped) (P.283)
Select to enable/disable the
Parking Support Brake function.
HUD (Head-up display) (if
■
equipped) (P.117)
Select to change the head-up
display setting.
RSA (Road Sign
■
Assist) (if equipped)
(P.253)
Select to set up the following
items.
 Road Sign Assist on/off
Select to enable/disable the RSA
(Road Sign Assist).
 "Notification method"
Select to change each notification
method used to notify the driver
when the system recognizes
excess speed and no-entry sign.
 "Notification Level"
Select to change each notification
level used to notify the driver when
the system recognizes a speed limit
sign.
2-1. Instrument cluster
Vehicle Settings
■
 PBD (Power Back Door)
(P.137)
Select to set up the following items.
• System settings
Select to enable/disable the power
back door system.
• "Hands Free" (if equipped)
Select to enable/disable the Hands
Free Power Back Door operation.
• "Opening Adjustment"
Select the open position when
power back door is fully open.
• "Volume"
Select to set the volume of the
buzzer which sounds when the
power back door system operates.
 "TPWS setting" (Tire Pres-
sure Warning System)
(P.400)
• "Setting Pressure"
Select to initialize the tire pressure
warning system.
• "Identify Wheel"
Select to register the ID codes of
the tire pressure sensors to the tire
pressure warning system.
• "Setting Unit"
Select to change the units of mea-
sure displayed.
 Rear Seat Reminder
(P.133)
Select to enable/disable the rear
seat reminder function.
 "Scheduled Maintenance"
(P.378)
113
2