Table of Contents
Advertisement
112
2-1. Instrument cluster
• For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding
. When the setting
screen is displayed, select the
setting or desired value (time,
etc.) with
3
After changing the settings,
press
of the meter control
switches.
LTA (Lane Tracing
■
Assist) (P.243)
Select to set up the following
items.
"Lane Center"
Select to enable/disable the lane
centering function.
"Steering Assist"
Select to enable/disable steering
wheel assistance.
"Alert"
Select to set the alert type.
"Sensitivity"
Select to set the warning sensitivity.
"Sway Warning"
Select to enable/disable the vehicle
sway warning.
"Sway Sensitivity"
Select to set the vehicle sway warn-
ing sensitivity.
PCS (Pre-Collision Sys-
■
tem) (P.235)
Select to set up the following
.
items.
PCS on/off
Select to enable/disable the pre-
collision system.
"Sensitivity"
Select to change the pre-collision
warning timing.
BSM (Blind Spot Moni-
■
tor) (P.267)
Select to set up the following
items.
BSM (Blind Spot Monitor)
on/off
Select to enable/disable the BSM
system.
"Brightness"
Select to switch the brightness of
the outside rear view mirror indica-
tors. (P.267)
"Sensitivity"
Select to change the alert timing for
an approaching vehicle.
(Intuitive parking
■
assist) (if equipped)
(P.276)
Select to set up the following
items.
Intuitive parking assist on/off
Select to enable/disable the Intui-
tive parking assist.
"Volume"
Select to set the volume of the
buzzer which sounds when the
Intuitive parking assist is operated.
Advertisement
Table of Contents
