Table of Contents
Advertisement
Canceling and resuming
the speed control
1
Pressing the cancel switch
cancels the speed control.
The speed control is also canceled
when the brake pedal is depressed.
(When the vehicle has been
stopped by system control,
depressing the brake pedal does
not cancel the setting.)
2
Pressing the "+RES" switch
resumes the cruise control
and returns vehicle speed to
the set speed.
Approach warning (vehi-
cle-to-vehicle distance
control mode)
When your vehicle is too close
to a vehicle ahead, and suffi-
cient automatic deceleration via
4-5. Using the driving support systems
the cruise control is not possi-
ble, the display will flash and the
buzzer will sound to alert the
driver. An example of this would
be if another driver cuts in front
of you while you are following a
vehicle. Depress the brake
pedal to ensure an appropriate
vehicle-to-vehicle distance.
■
In the following instances, warn-
ings may not occur even when
the vehicle-to-vehicle distance is
small.
When the speed of the pre-
When the preceding vehicle is
Immediately after the cruise
When depressing the acceler-
Selecting constant speed
control mode
When constant speed control
Warnings may not occur
when
ceding vehicle matches or
exceeds your vehicle speed
traveling at an extremely slow
speed
control speed was set
ator pedal
263
4
Advertisement
Table of Contents
