Table of Contents
Advertisement
364
5-4. Using the other interior features
3
Point the remote control
transmitter for the device at
the rear view mirror, 1 to 3 in.
(25 to 75 mm) from the
®
HomeLink
Keep the HomeLink
in view while programming.
4
Program a device.
Programming a device other
than an entry gate (for U.S.A.
owners)
Press and hold the remote con-
trol transmitter button until the
®
HomeLink
indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.
buttons.
®
indicator light
Programming an entry gate
(for U.S.A. owners)/Program-
ming a device in the Cana-
dian market
Press and release the remote
control transmitter button at 2
second intervals, repeatedly,
until the HomeLink
light changes from slowly flash-
ing orange to rapidly flashing
(green) (rolling code) or continu-
ously lit (green) (fixed code).
5
Test the HomeLink
tion by pressing the newly
programmed button and
observing the HomeLink
indicator light:
®
HomeLink
indicator light illu-
minates: Programming of a
fixed code device has com-
pleted. The garage door or
other device should operate
when a HomeLink
pressed and released.
®
HomeLink
indicator light
flashes rapidly: The garage
door opener or other device is
equipped with a rolling code.
To complete programming,
firmly press and hold the
®
HomeLink
button for 2 sec-
onds then release it.
If the garage door or other
device does not operate, pro-
ceed to "Programming a roll-
ing code system".
®
indicator
®
opera-
®
®
button is
Advertisement
Table of Contents
