Table of Contents
Advertisement
152
3-2. Opening, closing and locking the doors
■
When the vehicle is not driven
for extended periods
●
To prevent theft of the vehicle, do
not leave the electronic key within
6 ft. (2 m) of the vehicle.
●
The smart key system can be
deactivated in advance. (P.505)
●
Battery-saving mode can reduce
the power consumption of elec-
tronic keys. (P.150)
■
To operate the system properly
Make sure to carry the electronic
key when operating the system. Do
not get the electronic key too close
to the vehicle when operating the
system from the outside of the vehi-
cle.
Depending on the position and hold-
ing condition of the electronic key,
the key may not be detected cor-
rectly and the system may not oper-
ate properly. (The alarm may go off
accidentally, or the door lock pre-
vention may not operate.)
■
Certification for the smart key system
For vehicles sold in the U.S.A., Hawaii, Guam, Saipan and Puerto Rico
■
If the smart key system does
not operate properly
●
Locking and unlocking the doors:
Use the mechanical key.
(P.467)
●
Starting the hybrid system:
P.468
■
Customization
Settings (e.g. smart key system)
can be changed.
(Customizable features: P.505)
If the smart key system has been
deactivated in a customized setting,
refer to the explanations for the fol-
lowing operations.
●
Locking and unlocking the doors:
Use the wireless remote control or
mechanical key. (P.131, 467)
●
Starting the hybrid system and
changing power switch modes:
P.468
●
Stopping the hybrid system:
P.198
Advertisement
Table of Contents
