Daikin Altherma R Hybrid Installer's Reference Manual page 149

CHYHBH05+08AF + EHYKOMB33A
Daikin Altherma R Hybrid
4P471761-1E – 2020.10
Measured value at maximum
power
10.8
10.6
10.4
10.2
10.0
9.8
9.6
9.4
9.2
9.0
8.8
8.6
3 After measuring the CO
cap and the sampling point back in their place. Make sure they are gastight.
4 Select High setting by simultaneously pressing
appear on the service display.
5 Measure the CO
2
values in the table indicating the CO
your local dealer.
6 Press and simultaneously to exit the test program.
7 Put the front panel back in its place.
Adjustment values CO
(front cover opened)
Natural gas 2H/2E
(G20, 20 mbar)
—
9.0±0.1
8.9±0.1
8.8±0.1
8.7±0.1
8.6±0.1
8.5±0.1
percentage and adjusting the setting, put the cover
2
percentage. If the CO
2
percentage at maximum power, contact
2
8 Configuration
|
(%) at minimum power
2
Propane 3P (G31,
30/50/37 mbar)
10.5±0.1
10.3±0.1
10.1±0.1
9.9±0.1
9.8±0.1
9.6±0.1
—
and twice. Capital
percentage still deviates from the
Installer reference guide
will
149