Introduction; Important Information; Safety Precaution - Kodak Multiloader 700 Side-by-Side Kit Installation Instructions Manual

II 3066-2

1. INTRODUCTION

IMPORTANT INFORMATION

Accessory Model KODAK MULTILOADER 700 SIDE-BY-SIDE KIT for use only with
applicant's film handling units where the acceptability of the combination is determined by
Underwriter Laboraties Inc.
•
KODAK MULTILOADER 700
•
KODAK MULTILOADER 700 PLUS
•
KODAK X-OMAT 460RA PROCESSOR
•
KODAK X-OMAT 480RA PROCESSOR
•
KODAK X-OMAT M6B PROCESSOR
Accessory Model KODAK MULTILOADER 700/700PLUS SIDE-BY-SIDE KIT /5000RA for
use only with applicant's film handling units where the acceptability of the combination is
determined by Underwriter Laboraties Inc.
•
KODAK MULTILOADER 700
•
KODAK MULTILOADER 700 PLUS
•
KODAK X-OMAT 5000RA PROCESSOR

SAFETY PRECAUTION

If the electrical connection of the KODAK MULTILOADER 700 SIDE-BY-SIDE KIT is
hardwired a MAIN POWER SWITCH consisting of a 2-pole switch with a solid neutral and
common trip must be-
•
located on a wall adjacent to the SIDE-BY-SIDE KIT
•
easily accessible
•
visible from the front of the SIDE-BY-SIDE SYSTEM.
Ensure that the electrical connection to the mains for
•
KODAK MULTILOADER 700 is as stated in Site Specification N-704
•
KODAK RP X-OMAT PROCESSOR M6B is as stated in Site Specification 635883
•
KODAK X-OMAT 460/480 RA PROCESSOR is as stated in Site Specification 246613
If the SIDE-BY-SIDE KIT or the ML700 or the PROCESSOR is connected with a POWER
CORD and PLUG to the mains, easily accessible and visible wall outlets close to the
SIDE-BY-SIDE KIT must be provided.
10/98
NOTE
1-2 KODAK AG, Stuttgart