Replacements; Introduction; Cassette Transport; Removal Of The Front Panel - Kodak Miniloader 2000 Service Manual

SM 3477

2. REPLACEMENTS

INTRODUCTION

In this section it is frequently explained how to use the CES SERVICE SOFTWARE. The first
line always tells what should be performed. In the next lines it is explained how to reach this
goal. These additional explanations are printed italic and can be skipped if you are
experienced with the CES SERVICE SOFTWARE.
EXAMPLE:
1
. Start the CASSETTE INPUT FLAP MOTOR M1
Start the SERVICE PROGRAM.
Select SERVICE MODE from the GLOBAL MENU .......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed ..................................................................... press ENTER
Select COMPONENT TEST from the MAIN MENU ....................... press ENTER
Select CASSETTE MOTORS ................................................................... press ENTER
Select INPUT FLAP MOT M1 .............................................................. press ENTER
Select CLOSE/OPEN ................................................................................ press ENTER

CASSETTE TRANSPORT

REMOVAL OF THE FRONT PANEL

PURPOSE:
To get better access to the INPUT FLAP, to the FRONT ROLLERS of the CASSETTE
TRANSPORT, to the DISPLAY and to take off the TOP FRAME, the FRONT PANEL has to
be removed.
1
. Switch off ML2000 (ML2000 P).
2
. Open the TOP COVER.
3
. Take off the SIDE PANELS.
4
. Take out MOUNTING SCREWS 1, 2 and 3.
5
. Loosen MOUNTING SCREW No. 4. Do not take it out!
6
. Pull up the BRACKET. It is now possible to take off the FRONT PANEL.
KODAK AG, Stuttgart
figure 2-1
2-1
REPLACEMENTS
6/97