Legrest Maintenance; Installing/Removing Legrests - Invacare Mirage User Manual

5

Legrest Maintenance

WARNING:
• After ANY adjustments, repair, or service and BEFORE use, make sure that all screws, nuts
and bolts are tightened securely - otherwise injury or damage may result.
5.1 Installing / Removing Legrests
Installing 80° Fixed Angle Type
1. Turn the Legrest to the side (open footplate is
perpendicular to wheelchair).
2. Install the Pin at the top of the legrest into the
hole in the hanger tube. Push downwards.
3. Rotate the legrest towards the inside of the
wheelchair until it locks into place.
NOTE:
The footplate will be on the inside of the wheel-
chair when locked in place.
4. Repeat STEPS 1-3 for other legrest assembly.
Removing 80° Fixed Angle Type
1. To remove the legrest, push the release lever either inwards/outwards or pull towards the seat,
rotate legrest outwards and lift upwards.
34
Release lever
Footplate flip-up
Pin
Hanger tube