Seating; Installing/Removing Seat Cushion; Lapbelt - Invacare Mirage User Manual

8

Seating

WARNING
• After ANY adjustments, repair or service and BEFORE use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
8.1 Installing / Removing Seat Cushion
Installing/Removing
NOTE:
The cushion inner may be removed from the nylon cover by sliding it out from cover flap on the
underside of the cushion.
1. Ensure the hook and loop fastener strip on the seat is visible (remove covering strip if neces-
sary).
2. Position the cushion on the seat with the wedge shape end at the wheelchair front and push
down to secure.
3. To remove, pull up on cushion to release the hook and loop fastening. Remove cushion from
seat.
8.2

Lapbelt

A lapbelt is provided for use while seated in the power chair. INVACARE recommends that you
keep the lapbelt fastened at all times while seated in the chair. Buckles are fitted to each side of the
belt to allow for size adjustment.
51