Removing Front Fender; Installing Front Fender; Removing The Shock Absorber - KTM 85 SX 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.16
11.17
11.18
54

Removing front fender

V00830-10

Installing front fender

V00831-10

Removing the shock absorber

A00044-10
Preparatory work
–
Remove the start number plate. (
Main work
–
1
Remove screws .
–
2
Remove screws . Take off the front fender.
Main work
–
Position front fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Mount and tighten screws
Guideline
Screw, front fender
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach the brake line from the brake line guide.
–
1
Remove screw and lower the rear wheel with the link fork
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
2
Remove screw , push splash protector
remove the shock absorber.
p. 53)
1
.
M6 6 Nm (4.4 lbf ft)
2
.
M6 6 Nm (4.4 lbf ft)
p. 53)
p. 44)
3
to the side, and