11 SERVICE WORK ON THE CHASSIS
11.27
11.28
11.29
58
V00840-10
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
V00841-10
Installing the main silencer
V00841-11
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
–
Insert the air filter and position top retaining pin
B
ing
.
The air filter is correctly positioned.
–
Secure the bottom retaining pin
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
–
Install the air filter box cover. (
–
1
Remove screw
.
–
Pull off the main silencer from the manifold at exhaust
2
sleeve
.
–
Mount the main silencer with exhaust sleeve
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
1
in bush-
2
C
with holding tab
p. 56)
1
.
2
.
M6
10 Nm (7.4 lbf ft)
.