11 SERVICE WORK ON THE CHASSIS
11.9
48
Removing the lower triple clamp
V00874-10
V00875-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
(
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
1
Pull fuel tank breather
–
2
Loosen screw
. Remove nut
clamp with the handlebar in an upward direction, and hang it
to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove protective ring
–
Take off the lower triple clamp with the steering stem in a
downward direction.
–
Remove the upper steering head bearing.
p. 44)
(
p. 84)
p. 45)
p. 53)
p. 54)
out of the steering stem.
3
, pull off the upper triple
.