11.10
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Slide on O-ring
–
Position protective ring
V00489-10
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
S03451-10
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
S03452-10
rebound and compression damping is located in the
right fork leg.
SERVICE WORK ON THE CHASSIS 11
p. 124)
1
.
2
.
3
.
, but do not tighten yet.
5
of the right fork leg is positioned to
of the left fork leg faces the front.
49