11.19
Installing the shock absorber
11.20
Removing the seat
11.21
Mounting the seat
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
A00044-11
Screw, bottom
shock absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
V00836-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
V00837-01
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V00836-10
SERVICE WORK ON THE CHASSIS 11
1
to the side and position the shock
2
.
M12
60 Nm (44.3 lbf ft)
3
.
M12
60 Nm (44.3 lbf ft)
1
.
1
of the seat fixing.
M6
10 Nm (7.4 lbf ft)
Loctite
®
2701™
Loctite
®
2701™
p. 44)
55