Table of Contents
Advertisement
ISEC-WL-SIREN Wireless Siren
1. Go to
www.iSecureByNapco.com
cure account.
2. Click Wireless Modules > Siren.
3. In the SIRENS screen (shown below), program each siren
in your system (up to 4 allowed) (when finished, click
Save).
Note: The Hub's integral siren only activates upon an Area 1
alarm. All other external sirens activate upon an alarm in
any Area.
1
TYPE
Sirens can be powered
by an AC power supply
(plugged into a 120VAC
unswitched wall outlet) or
with batteries. Select the
power type used by your
siren.
Napco iSecure Security System
Programming: Sirens
and log into your iSe-
2
NAME
Type the siren
description you
wish to appear
on the keypad
display
All technical manuals are available in PDF format at
STATUS
Indicates the current con-
dition of the siren, whether
active or inactive; to re-
learn the unit, click Re-
learn.
SIGNAL STRENGTH
3
Relative intensity of the
last transmission, on a
scale of 1-10 (10 being
RF ID
the strongest). Note: A
Type in the
reading of 3 or less indi-
7 digit sen-
cates reception may be
sor ID # for
erratic; relocate the sen-
the device
sor closer to the Hub.
tech.napcosecurity.com
4
53
Hide quick links:
Advertisement
Table of Contents
