Table of Contents
Advertisement
Programming: Glass-Break Sensors
1. Go to
www.iSecureByNapco.com
cure account.
2. Click Sensor Configuration.
3. In the SENSOR CONFIGURATION screen (shown be-
low), program the installed glass break sensors as indicat-
ed (when finished, click Save).
3
SENSOR FUNCTION
For most installations, we recommend selecting "Instant". With "Instant", when
the system is armed, the sensor will immediately trigger an alarm when the sound
of glass breaking is detected. If you select "24Hr Zone Audible", the system will
trigger an alarm when the sound of glass breaking is detected, whether the sys-
tem is armed or disarmed.
1
DESCRIPTION
Type the sensor descrip-
tion you wish to appear
on the keypad display
46
ISEC-GLASSBREAK
Wireless Glass-Break Sensor
and log into your iSe-
2
SENSOR TYPE
Select "Glass
Break".
All technical manuals are available in PDF format at
4
SENSOR ID
Type in the 7
digit sensor ID
# for the device
SIGNAL STRENGTH
Relative intensity of the last transmis-
sion, on a scale of 1-10 (10 being the
strongest). Note: A reading of 3 or
less indicates reception may be erratic;
relocate the sensor closer to the Hub.
tech.napcosecurity.com
5
AREA
Default = 1. See the key-
pad Operating Guide for
the definition of "Area".
6
ENABLE REPORTING
Check to enable central
station reporting
Napco iSecure Security System
Hide quick links:
Advertisement
Table of Contents
