NAPCO iSecure Installation & Programming Instructions page 7

Dealer Account Activation & Programming (cont'd)
4. In the main programming "SYSTEM SETTINGS" screen,
select General Settings.
Enter the Master Code printed on the iSecure card in the
Master Security Code field, then click Save.
Any changes to the Master Security Code requires that
you exit and re-enter the iSecure Cloud Web Portal.
5. Click Log Out to exit, then log back in to the iSecure Cloud
Web Portal (www.iSecureByNapco.com) as described in
step 1 and step 2. Exiting and re-entering ensures that the
iSecure Cloud Web Portal and the Master Security Code
are synchronized and the system is fully protected by your
secure account password.
When changes are made to the system, the Upload/
Download/Save/Restore button on the main programming
screen will appear yellow.
6. Click this yellow button, and click Download All Changes.
(or click Full Download for new accounts accessed for the
first time).
In the confirmation popup, click Yes, download! to send all
changes to the Go-Anywhere Smart Hub.
Napco iSecure Security System
Label contains information about the Hub's integral 900MHz transceiver,
including its assigned RFID, radio frequency (RF) Channel (number between
0 - 32) and RF MAC reference number.
The Channel number may be needed if two separate systems are installed
near each other and are using the same frequency (see RF Channel Scan
on page 64 to scan for the presence of other nearby iSecure security system
radio signals to determine if the nearby system is using the same 900Mhz RF
channel as the system you are installing).
All technical manuals are available in PDF format at
Now that the system is synchronized with the Master Secu-
rity Code, proceed to the next section to set up the central
station communications.
System
Information
Card
(OI404LF)
tech.napcosecurity.com
Label contains the unique Radio ID
assigned to the system's integral
LTE cellular radio communicator (for
wireless central station communica-
tion, notifications, remote program-
ming and firmware downloads).
Includes the mandated ICC ID and
FCC IC identifiers (for reference
only).
Network MAC - Unique Media Ac-
cess Control identifier assigned to the
integral network interface controller.
Master Security Code - Unique Fixed
code added to the Hub memory at the
factory. Enter code at the keypad to
unlock access to system functions.
Keep this code private and secure.
Summary Label - Contains the
corresponding RFIDs (Radio Fre-
quency IDentification) of all transmit-
ters in the Kit.
7