NAPCO iSecure Installation & Programming Instructions page 74

Professional cellular alarm system
Table of Contents

Advertisement

-closed (NC) cover and wall tamper, each unit is
shipped with the cover tamper operational, and
the wall tamper disabled.
ISEC-HEAT Wireless Heat Detector with Rate
of Rise: A high-quality 135°F (57°C) fixed tem-
perature detector with Rate of Rise and built-in
supervised digitally-coded radio transmitter. It is
compatible with Napco's iSecure RECV series
supervised receivers that monitor alarms, re-
stores, low battery, tamper and status.
ISEC-KEYFOB
Transmitter:
serves as an Area arm / disarm device with two
auxiliary functions, and may be used as a police
panic and/or auxiliary emergency transmitter.
ISEC-WL-MODULE Wireless 8-Zone Takeover
Module: Designed to make use of the wiring and
power supply of an existing wired security sys-
tem, the ISEC-WL-MODULE is designed to con-
vert 8 hardwired zones into eight supervised wire-
less burglary, 4-wire Fire or CO zones, thus sim-
plifying installation, including the ability to work
with existing 12 volt power supplies. The module
is commonly mounted next to the existing control
panel, in close proximity to the existing hardwired
zone
connections.
900MHz.
ISEC-MOTION Passive Infrared Motion Sen-
sor: An advanced PIR sensor designed for use
with Napco's iSecure RECV series wireless re-
ceivers. The ISEC-MOTION is powered by two
supplied 3-volt lithium batteries (estimated battery
life 3 years). When battery voltage drops below
normal, a low-battery report will be sent to the re-
ceiver.
ISEC-PANIC Single Button Waterproof Panic:
A single-function pendant/keychain transmitter
that serves as an emergency device for use as a
police panic and/or auxiliary emergency transmit-
ter. Two replaceable 1.5V silver oxide cells pow-
er this portable transmitter (it includes a flashing
LED to warn when low batteries require replace-
ment). To operate, simply press the button mo-
mentarily.
ISEC-WL-SIREN Wireless Siren: Output pro-
vides 85dBA sound level at 10 feet, supports Si-
ren, Temporal Fire and CO alarm audible cadenc-
es, with optional bright LED strobe.
from 110VAC with battery backup, or by battery
74
Ordering Information (cont'd)
4-Button
Pendant/Keychain
This multifunction transmitter
Wireless
frequency
All technical manuals are available in PDF format at
power alone; mountable on flat wall or by AC out-
let plug; for indoor or outdoor operation. The iSe-
cure system can accommodate up to 4 wireless
sirens. Wireless frequency is 900MHz.
ISEC-SMOKE Supervised Wireless Digital
Smoke Sensor:
smoke sensor with built-in supervised digitally-
coded radio transmitter.
Napco's iSecure RECV series supervised receiv-
ers that monitor alarms, restores, low battery,
tamper and status.
Optional ISEC-WIFI Internet Module for central
station communication and notifications.
plied in KIT 3 (see above).
Optional ISEC-ZWAVE Z-Wave Module for pro-
gramming/control of Z-Wave home automation
controls such as Z-Wave-enabled lights, outlets,
thermostats, garage door operators and door
locks.
is
Operable
tech.napcosecurity.com
A high-quality photoelectric
It is compatible with
Napco iSecure Security System
Sup-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents